Loading...
Loading...
Medical Disclaimer: This information is for educational purposes only and is not a substitute for professional medical advice.
0.25% Bupivacaine Hcl
Brand Name
0.25% Bupivacaine Hcl
Generic Name
0.25% Bupivacaine Hcl
Active Ingredient
BupivacaineCategory
Nonsteroidal Anti-inflammatory Drug [EPC]
Salt Form
Hydrochloride
Variants
1
Different strengths and dosage forms
| Strength | Form | Route | NDC |
|---|---|---|---|
| 2.5 mg/mL | INJECTION, SOLUTION | INFILTRATION, PERINEURAL | 51662-1606 |
Detailed information about 0.25% Bupivacaine Hcl
This page is for informational purposes only and does not replace medical advice. Before using any prescription or over-the-counter medication for 0.25% Bupivacaine Hcl, you must consult a qualified healthcare professional.
Bupivacaine is a potent, long-acting amide-type local anesthetic used for local infiltration, peripheral nerve blocks, and epidural anesthesia to provide prolonged pain relief.
The dosage of bupivacaine varies significantly based on the anesthetic procedure, the area to be anesthetized, the vascularity of the tissues, the number of neuronal segments to be blocked, and the individual patient's physical status. Healthcare providers use the lowest dosage necessary to achieve the desired result.
Maximum Recommended Dose: The maximum single dose for an average healthy adult should not exceed 175 mg without epinephrine, or 225 mg with epinephrine. In any 24-hour period, the total dose should generally not exceed 400 mg.
Bupivacaine is used in pediatric patients for infiltration, nerve blocks, and caudal or epidural anesthesia. Dosing is strictly weight-based to avoid systemic toxicity.
While bupivacaine is primarily metabolized by the liver, its metabolites are excreted by the kidneys. No specific initial dose adjustment is usually required for a single dose, but repeated doses or continuous infusions should be monitored closely in patients with severe renal impairment to prevent metabolite accumulation.
Because bupivacaine is metabolized by the liver, patients with hepatic disease (e.g., cirrhosis, hepatitis) have a reduced ability to clear the drug. Healthcare providers typically reduce the dose or increase the interval between doses to avoid toxic systemic levels.
Geriatric patients often require lower doses. Age-related decreases in cardiac output and hepatic blood flow can slow the clearance of bupivacaine. Furthermore, the elderly may be more sensitive to the cardiovascular and central nervous system effects of the drug.
Bupivacaine is administered exclusively by healthcare professionals via injection or infusion. It is not for self-administration.
Since bupivacaine is administered by a healthcare professional for a specific procedure or as a continuous hospital-based infusion, a missed dose by the patient is not possible. If a continuous infusion is interrupted, the medical staff will restart it according to the protocol.
An overdose of bupivacaine leads to Local Anesthetic Systemic Toxicity (LAST). This is a medical emergency.
> Important: Follow your healthcare provider's dosing instructions. Do not adjust your dose without medical guidance.
Side effects from bupivacaine are often related to the technique of administration (such as an epidural) rather than the drug itself. Common experiences include:
> Warning: Stop the administration (if on a pump) and alert medical staff immediately if you experience any of these symptoms.
Bupivacaine is generally intended for short-term use. However, some long-term concerns exist:
0.75% Bupivacaine Concentration Warning: The FDA has issued a Black Box Warning for the 0.75% concentration of bupivacaine. It is strictly contraindicated for obstetrical anesthesia (epidural use during labor). There have been reports of cardiac arrest with difficult resuscitation or death during epidural anesthesia in obstetrical patients using this high concentration. Resuscitation has been difficult or impossible despite apparently adequate preparation and appropriate management. The 0.75% concentration should be reserved for surgical procedures where a high degree of muscle relaxation and prolonged effect are necessary.
Report any unusual symptoms to your healthcare provider.
Bupivacaine must only be administered by clinicians who are well-versed in the diagnosis and management of dose-related toxicity and other acute emergencies which might arise from the block to be employed. Delay in proper management of dose-related toxicity, underventilation from any cause, and/or altered sensitivity may lead to the development of acidosis, cardiac arrest, and, possibly, death.
Obstetrical Anesthesia Restriction: The 0.75% concentration of bupivacaine hydrochloride is not recommended for obstetrical anesthesia. There have been reports of cardiac arrest with difficult resuscitation or death during epidural anesthesia in obstetrical patients. In most cases, this has followed use of the 0.75% concentration. Resuscitation has been difficult or impossible despite apparently adequate preparation and appropriate management. This concentration should be reserved for surgical procedures where a high degree of muscle relaxation and prolonged effect are necessary.
During bupivacaine administration, the following must be monitored continuously:
Bupivacaine can temporarily impair motor function and coordination. Patients should not drive or operate heavy machinery until the full effects of the anesthesia have worn off and they have regained full sensation and muscle strength. This typically takes several hours after the last dose.
Alcohol should be avoided for at least 24 hours after receiving bupivacaine. Alcohol can enhance the central nervous system depressant effects of any residual anesthetic and may increase the risk of falls or injury while sensation is still impaired.
For single-dose blocks, the drug naturally wears off. For continuous infusions, the dose is typically tapered or stopped once oral pain medications are sufficient. There is no 'withdrawal' syndrome, but a rebound increase in pain (breakthrough pain) may occur if alternative analgesia is not provided.
> Important: Discuss all your medical conditions with your healthcare provider before starting Bupivacaine.
Since bupivacaine is administered via injection for acute procedures, food interactions are generally not a concern. However, patients should follow their surgeon's 'NPO' (nothing by mouth) instructions prior to any procedure involving anesthesia.
Bupivacaine does not typically interfere with standard laboratory blood tests. However, the presence of epinephrine in some bupivacaine formulations may cause a transient increase in blood glucose levels.
For each major interaction, the management strategy involves:
> Important: Tell your doctor about ALL medications, supplements, and herbal products you are taking.
Bupivacaine must NEVER be used in the following circumstances:
Conditions requiring careful risk-benefit analysis:
Patients allergic to one amide local anesthetic are likely to be allergic to others in the same class. However, they may be able to safely receive 'ester-type' local anesthetics (like procaine or tetracaine), provided the allergy is confirmed to be class-specific. Always inform your anesthesiologist of any previous 'caine' allergies.
> Important: Your healthcare provider will evaluate your complete medical history before prescribing Bupivacaine.
Bupivacaine is classified as FDA Pregnancy Category C. It does cross the placenta. While it is widely used for epidural anesthesia during labor, it must be used with caution.
Bupivacaine is excreted in human milk in very small amounts. According to the American Academy of Pediatrics, the use of bupivacaine during breastfeeding is generally considered compatible, as the systemic levels in the mother are usually low and the infant's exposure is negligible. No adverse effects on nursing infants have been documented.
Bupivacaine is approved for use in children for various types of regional anesthesia. However, because children have different metabolic rates and higher body water content, weight-based dosing (mg/kg) is mandatory. The 0.75% concentration is not recommended for children. Safety and effectiveness in children under the age of 2 have not been fully established for all types of blocks.
Patients over age 65 are at a higher risk of bupivacaine-related complications.
In patients with kidney failure, the clearance of bupivacaine metabolites may be reduced. While a single dose is usually safe, continuous infusions require careful monitoring for signs of systemic toxicity, as the parent drug and its metabolites can accumulate over several days.
Patients with severe hepatic impairment (Child-Pugh Class C) have a significantly reduced ability to metabolize bupivacaine. This increases the half-life and the risk of Local Anesthetic Systemic Toxicity (LAST). Dose reductions of 25% to 50% may be necessary for these patients.
> Important: Special populations require individualized medical assessment.
Bupivacaine is a sodium channel blocker. It binds to the S6 segment of Domain IV of the voltage-gated sodium channel (Nav1.5 in the heart, and various isoforms in the nerves). By binding to the internal pore of the channel, it prevents the rapid influx of sodium ions necessary for the depolarization of the neuronal membrane. This stops the propagation of the action potential along the axon, effectively 'silencing' the nerve and preventing pain signals from reaching the brain.
| Parameter | Value |
|---|---|
| Bioavailability | 100% (Systemic absorption from site) |
| Protein Binding | 95% (Alpha-1-acid glycoprotein) |
| Half-life | 2.7 hours (Adults), 8.1 hours (Neonates) |
| Tmax | 30 - 45 minutes (after infiltration) |
| Metabolism | Hepatic (CYP3A4) |
| Excretion | Renal (95% as metabolites, 5% unchanged) |
Bupivacaine is a member of the Amide Local Anesthetic class. It is structurally related to lidocaine and mepivacaine but is more lipid-soluble and potent. It is often compared to Ropivacaine, which is a pure S-enantiomer designed to have less cardiotoxicity than racemic bupivacaine.
Common questions about 0.25% Bupivacaine Hcl
Bupivacaine is a long-acting local anesthetic used to provide pain relief and numbness for surgical procedures, labor, and post-operative recovery. It is commonly administered as an epidural for childbirth or as a nerve block for surgeries on the limbs. Unlike shorter-acting anesthetics, bupivacaine is chosen when several hours of pain control are needed. It works by blocking the nerves from sending pain signals to the brain. Your doctor will determine the appropriate use based on your specific surgery or pain management needs.
The most common side effects include nausea, vomiting, and low blood pressure (hypotension), particularly when used in spinal or epidural anesthesia. Some patients may also experience a headache, dizziness, or mild back pain at the injection site. These effects are usually temporary and resolve as the medication wears off. In some cases, urinary retention (difficulty peeing) may occur for a few hours. Always report any lingering numbness or weakness to your medical team.
It is strongly recommended that you avoid alcohol for at least 24 hours after receiving bupivacaine. Alcohol can increase the sedative effects of any residual anesthesia and may interfere with your coordination while your sensation is still returning. Additionally, alcohol can affect your blood pressure, which may already be fluctuating following a medical procedure. Combining alcohol with post-operative pain medications can also lead to dangerous respiratory depression. Always consult your surgeon for specific post-operative instructions regarding alcohol.
Bupivacaine is frequently used during pregnancy, most notably for epidural anesthesia during labor and delivery. While it is generally considered safe for this purpose, it is classified as Pregnancy Category C, meaning it should only be used if the benefits outweigh the risks. High concentrations (0.75%) are strictly avoided in pregnant women due to the risk of maternal heart complications. Your anesthesiologist is trained to use the lowest effective dose to ensure the safety of both mother and baby. Fetal heart rate is typically monitored closely during its use.
The onset of bupivacaine is considered intermediate, typically taking between 5 and 20 minutes to reach its full effect. The exact time depends on where the drug is injected; for example, a local skin infiltration works almost immediately, while a large nerve block or epidural may take 15 minutes or more to fully 'set.' You will feel a warm, tingling sensation followed by a loss of pain and eventually a loss of movement in the affected area. The effects then last significantly longer than other local anesthetics, often for 3 to 9 hours.
Bupivacaine is not a medication you take on a long-term schedule, so 'stopping' it usually refers to the end of a single dose or a continuous hospital infusion. There is no physical withdrawal or 'crash' associated with the drug itself. However, as the medication wears off, you will begin to feel the surgical pain that was being blocked. Your healthcare team will typically transition you to oral pain medications before the bupivacaine effects completely disappear to ensure you remain comfortable. If you are on a continuous pump, do not attempt to stop it yourself.
Because bupivacaine is administered by healthcare professionals in a clinical setting, it is virtually impossible for a patient to miss a dose. If you are receiving a continuous infusion via a pump and the pump stops or alarms, you should alert your nurse or doctor immediately. They will assess the site and restart the medication if appropriate. Do not attempt to adjust the settings on an anesthetic pump yourself. Your medical team manages the timing and dosage to ensure safety and efficacy.
No, bupivacaine does not cause weight gain. It is a short-term anesthetic used for acute procedures and does not have the metabolic or hormonal effects associated with medications that cause weight changes, such as steroids or certain antidepressants. Any weight fluctuations experienced after a procedure are likely due to IV fluids administered during surgery, post-operative inflammation, or changes in activity levels during recovery. Bupivacaine is cleared from the body relatively quickly, usually within 24 hours. If you have concerns about weight changes after surgery, discuss them with your doctor.
Bupivacaine can interact with several types of medications, particularly those that affect heart rhythm or liver function. It is especially important to tell your doctor if you are taking anti-arrhythmic drugs like amiodarone, as these can increase the risk of heart-related side effects. Other local anesthetics can have additive toxic effects if used at the same time. Blood thinners are also a concern for patients receiving spinal or epidural bupivacaine due to the risk of bleeding near the spine. Always provide a full list of your current medications to your anesthesiologist.
Yes, bupivacaine is widely available as a generic medication and is produced by several different pharmaceutical manufacturers. The generic version is bupivacaine hydrochloride injection. It is also available under various brand names, such as Marcaine and Sensorcaine. There is also a specialized, branded long-acting form called Exparel (liposomal bupivacaine), which is not yet available as a generic. Generic bupivacaine is highly effective and is a standard of care in hospitals worldwide for regional anesthesia.
Other drugs with the same active ingredient (Bupivacaine)